Even if youâ€™ve been living a sheltered life under some cobbled Flemish hellingen youâ€™ve probably heard that in recent years, many wheel manufacturers have been following HED in offering an array of road wheels and racing wheels with a wider rim profile. Handspun, one of PavÃ©â€™s supporters, sent us a set of wheels to test. Handspun is a spin-off from Quality Bicycle Products, and is an expert wheelbuilding service that builds many fine sets of wheels. The wheels we rode are HEDâ€™s Novembre hubs laced to Belgium C2 rims, 24/28, laced 2-cross front and rear.
In recent years Iâ€™ve been frustrated with the high cost of repairing boutique wheelsets. Now that my rear Campagnolo Eurus has decided to break a bunch of spokes, what am I to do with a Record-quality, 21-hole hub? Meanwhile, my Mavic Ksyrium SSC SL wheels keep creaking. They can be either trued, or tensioned, but not both. Based on these frustrations, Iâ€™ve come to learn that durability is a bit of a myth, but one can approximate it with simpler gear. Thus, my initial impression is that Handspunâ€™s HED Novembre/Belgium C2 wheelset is a fine training wheelset. Were I to break a spoke, I could replace it with something available at my local bike shop; were I to trash the rim, I could relace it to anything with 28 holes. Both Handspun and HED also offer a variety of upgrades to this basic wheelset: Handspun offers DT Swiss hubs and DT Aerolite bladed spokes, and HED offers a line of wheels with carbon hubshells, titanium bits, and fewer spokes for those willing to lay out a few more dollars.
Handspunâ€™s wheelbuild is initially solid. As a musician (and a cyclist without a wheel tensiometer), I plucked the spokes to get an initial sense of their even tension, and gave the wheel a spin to check its true. Both were dead on. I intend to periodically check and re-check the tension and the true of these wheels as I put them through their paces this summer, on gravel-path training rides, criteriums, interval workouts, a week-long tour, and, getting into the fall, cyclocross training and racing. Iâ€™ll throw everything Iâ€™ve got at these wheels, and Iâ€™ll see what they throw back at me.
Handspun and HED both tout the many benefits of wider rims; HED is not shy in taking credit for their adoption across both the pro peloton and the industryâ€™s many wheel companies. The literature is that when paired with a 23mm tire, the wider rims create a constant tire profile with a more even transition from the tops to the sidewalls, thus improving handling and resulting in a smoother transition from the tire to the edge of the rim, thus improving aerodynamics.
When I mounted the wheels and left the house I felt some pressure â€“ would I even notice the difference? Wide rims have been around for a couple of years by now, but Iâ€™m a late adopter and have been riding ordinary old skinny rims. A lot of people already know what wide rims are “supposed” to feel like, but would I notice? Well, the differences between these wheels, and the Ksyriums I had been riding prior, were immediately apparent. The wide rims created a very tangible, noticeable, and positive difference in both handling and comfort. As I pointed my bike toward the trail heading out of the city, I went over some familiar ridges in the road â€“ ones that would give my bike a solid ca-clunk(!) and cause me to lighten my grip on the handlebars lest I bruise my palms through thin bar tape. Iâ€™ve ridden this path plenty, but this time, the HED wheels’ wider rims make the bike feel as though itâ€™s got wider tires on: they softened the impact. It felt like my stiff aluminum bike had fatter tires on it, or carbon seatstays, or just more give to it. I warmly welcomed this effect, and as I took the bike on to some of the more rotten streets and paths that I could think of – ones gouged by a winter’s worth of snowplows, or springtime flooding, or even just ones that still have cobbles on the surface (honoring the wheels’ namesake) – I felt the increased shock absorption of the wide rims.
When I met David Cory, the Handspun Brand Manager who was generous with his time and gave me a tour of Handspun’s facilities, I asked him what led him to put such an emphasis on wider rims in Handspun’s offerings. His answer was simple: “I rode them.” The benefits, he said, are obvious. I concur, and I think most riders would, too.
I followed roads to a desolate industrial park so that I could sprint around and dive into corners to see how they handle. Thereâ€™s some hyperbole that wide rims make clinchers feel like tubulars. From my experience, I donâ€™t think thatâ€™s entirely accurate, but itâ€™s close. With good tubulars, thereâ€™s that sense that the tires are glued to the ground underneath you and when you corner, theyâ€™re still grabbing the ground as they tug your bike around the corner. These do grab the ground underneath you and feel incredibly solid, urging you to turn harder and tighter by giving that hard-to-describe sense of confidence feeding back up through the bicycle – your front wheel gets stuck in a tight-radius turn. It doesn’t feel like placebos and snake oil – rather, it makes sense. The wider rim leads to a wider tire profile, and that means more rubber on the ground. More friction when you’re turning means you turn faster, tighter, with more control.
I did some sprinting, â€œled outâ€ by some gentle hills. My legs were mushy after a three-week vacation during which I mostly used my body for dancing and filtering wine. Take this with a grain of salt but I felt like I had a bit more at the top end of my speed, like I had a bit less resistance at the top end. Is this the aerodynamic advantage of the wide rims? Iâ€™m not sure â€“ Iâ€™m not even sure if I felt what I felt (hey, maybe I had a tail wind). HED says there’s an aerodynamic benefit in a wind tunnel; if that’s true, that’s great, but quite frankly, that benefit is secondary to their marked improvement in comfort and handling over traditional rims.
The bottom line, at this point, is that I like these wheels. Theyâ€™re a smart wheel, and they feel great. Theyâ€™re only initial impressions for now â€“ Iâ€™ll be keeping a diary with some rough estimates of mileage, road conditions, and the status of the wheel so that we can check in about the level of use and abuse theyâ€™ve seen, and how Handspunâ€™s wheelbuild holds up to the ringer Iâ€™ll put them through.